Payment & Shipping Terms:
|Material:||A05, A07, A33, A49, Cr26, Cr27, Cr30, R08, R26, R33, R55||OEM:||Manufacture Accroding To Customer Requirements|
|Application:||Interchangable With Most Standard Minng Slurry Pump, Ash Slurry Pump, Sand Dreding Pump Parts||Interchangable:||Interchangable To Most Standard Slurry Pumps|
|Production Lead Time:||20-45 Days|
We take advantage of material application, provide high chrome alloy and rubber parts for slurry pump series(AH, HH, L model), various kind of centrifugal pump spare parts , such as Slurry Pump Rubber / metal Impeller, Metal / Natural rubber liners, Expeller, etc
Our centrifugal slurry pump wear parts are designed by Spatial Structure CFD and Impeller Casting CAE. Our pump wear parts are made in our foundry and finished in our workshop with strict quality control. These high quality alloy wet- ends provide our customers with longer wear life due to metallurgical advancements and improved efficiency due to patented hydraulics. The users enjoy perfect fit and finish to reduce installation workload. Whether solids transport in the front-end, in-plant processing or tailings, we can produce the best parts for your application.
1. Slurry pump spare parts are mainly made of high-chromium alloy, hard nickel alloy, hastelloy alloy or elastic material, depending on the demand for chromium content in practical application.
2. Most of our slurry pump rubber parts contain natural rubber and synthetic rubber .The natural rubber type shows
some excellent properties ,such as good resistance to acid and corrosive slurry ,good abrasion resistance to small particles, etc. On the other hand, the synthetic rubber type possesses outstanding resistance to abrasion, corrosion as well as high temperature.
3.The slurry pump spare parts we supplied are suitable for standard slurry pump including vertical sump pump ,gravel pump and related 4 mining pumps ,and these products are all qualified .In addition ,we have built up our own factory for casting ,machining, testing and other procedures .
4. OEM drawing of slurry pump is acceptable, and we will provide our client with samples first for the quality inspection .
Slurry pump parts-----impeller:
The pump impeller is made of rubber or metal, and the metal liner and rubber liner are interchangeable .The back vane can reduce the sealing pressure ,and it can also cut down backflow to the largest extent at the same time .On the other hand ,cast-in impeller threads are more suitable for slurry .
With ceramic coating----high hardness and fracture
toughness and wear resistant
Shaft sleeve manage wear to minimize shaft cost.
Wherever there is a bearing support for the shaft, centrifugally cast shaft sleeves are used to prevent wear to the shaft. Refurbishment of the shaft is simply a matter of replacing the sleeve and reusing the shaft.
Slurry pump cover plate & frame plate for heavy duty centrifugal slurry pump in axial direction is used to bear pressure, and the liner is wear-resistant.
lurry pump parts-cover plate liner &frame plate liner
The cover plate is produced using elastomer or hard metal,
such as natural rubber, high -chromium alloy, etc.
It has various sizes and styles, and the installation is very easy. Additionally, OEM design is accepted. This product is also named as slurry pump liner, and it is also an overflow component. It can form a pump chamber with throat bush and frame plate liner insert. Meanwhile, it is white iron with high-chromium alloy whose content as much as 27%, and it shows good resistance to abrasion .
The sealing method contains packing seal, centrifugal seal and mechanical seal. The packing is usually used for packing seal and centrifugal seal, and our product has different models .Clients are recommended to buy two boxes of packing at one time which are sufficient for one pump
This is volute liner for slurry pump with excellent wear resistance, corrosion resistance and large passage area.
Good casing design makes maintenance easily and cost much lower. Advanced heat treat technology is used to treat high chrome alloy and results with a compact micro-structure and a high quality product.
Bearing assembly uses cylindrical structure, adjusting the space between impeller & front liner easily, being removed completely when being repaired.
They are made of iron, steel, rubber or high-chromium alloy. After the OEM parts are supplied by us depending on the machining drawing, andomponents are produced, we will provide customer with sample for quality detection.
Wear-resistant metal: A61, A05, A07, A11, A01
Anti-abrasive, anti-corrosive metal: A49, A33
Anti- abrasive metal: A22, A23, A25
Other optional metals or alloys: Duplex stainless steel, stainless steel, nickel cast iron, brass, bronze, etc.
Anti-abrasive, anti-corrosive rubber: natural rubber(R26, R24, R55......); Synthetic rubber(S01, S12, S21, S42......) Ceramics
(Note: The materials could be changed according to the customer’s requirements. )
Contact Person: Liuyw