Payment & Shipping Terms:
|Material:||A05, A07, A33, A49,R08, R26, R33, R55||OEM:||Manufacture Accroding To Drawing Or Parts Code|
|Application:||Interchangable To Minng Slurry Pump, Ash Slurry Pump, Sand Dreding Pump Parts||Process:||High Chrome Cast|
high chrome Mining slurry pump impeller of anti-abrasion and corrison-resistant high chrome cast iron
We offer the spares for all series mining slurry pumps, they include
|- Impeller,||- Lantern restrictor,|
|- Throat bush,||- Cover plate bolt,|
|- Front liner, Back liner,||- Volute,|
|- Wear plate,||- Throat bush, Shaft sleeve,|
|- Case, cover,||- Cover plate liner, Frame plate liner ,|
|- Stuffing box,||Volute liner, Volute packing|
The pump parts can be made of high chrome, a wide variety of elastomer or the latest in ceramic materials for longer service life and higher efficiency.
Wear-resistant metal: A61, A05, A07, A11, A01
Anti-abrasive, anti-corrosive metal: A49, A33
Bearing assembly – a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Liners – easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomeric. Elastomeric seal rings back all liner joints.
Casing – Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomeric impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
Throat bush – wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
One-piece frame – a very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.