Product Details:
Payment & Shipping Terms:
|
Material: | A05, A07, A33, A49 | OEM: | Manufacture Accroding To Drawing Or Parts Code |
---|---|---|---|
Application: | Interchangable To Minng Foam Slurry Pump | Process: | High Chrome Cast Iron |
Interchangable: | Interchangable To Most Standard Foam Slurry Pumps | ||
High Light: | Foam Concentrate Transfer Pump,Rubber Slurry Pump |
Steel Wear Resistant Slurry Pump Parts High Chrome
Foam transfer pumps
has been designed to increase the pumpability of frothy slurry. The pump operation is similar to hydrocyclone seperation.
The basic principle of the froth pump operation is to de-aerate or partially de-aerate the froth before it enters the pumping. Its handling capacity of the pump is muchhigher than that of other types of slurry pump without shaft seal and sealing water.
Features
· Bearing assembly Bearing housing is installed with motor frame base or supporting plate,Pulleys can be exchanged conveniently to adjust the pump rotating speed to satisfy the varying operating condition.
· Feeding tank-Feeding tank can be steel, stainless steel or rubber coated with overflow box and tangential inlet.
· Double casings structure the pump head .Wetted parts are metal lined, rubber lined or of other non-metallic material according to the different slurries.
Applications:
Mine: Black, non-ferrous ore slurry material pump and all kinds of concentrate and tailings conveying
Metallurgy: Transport various slurry for aluminium or steel manufacture
Coal: Coal mining, wing and various coarse and fine coal slurry transportation
Power plant: Remove power plant ,w ,various dregs or slurry transportation
Construction materials: Various mud sand slurry(such as Cement slurry) transportation
Chemical: Phosphatic fertilizer or potassic fertilizer factory various abrasive slurry trasportation
Water conservancy: Lake,river dredge, sediment,grit, High plastic clay Suction line to transportation
Pump parts
Completely interchangeable with slurry pumps and gravel pumps
For unlisted slurry pump parts, OEM service offered---Drawings needed.
- Impeller
- Metal Liner
- Rubber Liner
- Bearing Assembly
- Base
- Pump Volute;
- Cover Plate & Frame Plate
- Others
2. Materials
High chrome alloy: A05, A07, A33, A49, etc.
Natural rubber: R08, R26, R33, , etc.
Other material as per requests, like stainless steel, duplex stainless steel, Nickle alloy, Alloy 20, etc.
Slurry Pump Part Material
Part Name | Material | Specification | HRC | Application | OEM Code |
Liners & Impeller | Metal | AB27: 23%-30% chrome white iron | ≥56 | Used for higher wear condition with pH between 5 and 12 | A05 |
AB15: 14%-18% chrome white iron | ≥59 | Used for higher wear condition | A07 | ||
AB29: 27%-29% chrome white iron | 43 | Used for lower pH condition especially for FGD. It also can be used for low-sour condition and desulfuration installation with pH no less than 4 | A49 | ||
AB33: 33%-37% chrome white iron | It can transport oxygenated slurry with pH not be less than 1 such as phospor-plaster, nitric acid, vitriol, phosphate etc. | A33 | |||
Rubber | R08 | ||||
R26 | |||||
R33 | |||||
Expeller & expeller ring | Metal | B27: 23%-30% chrome white iron | ≥56 | Used for higher wear condition with pH between 5 and 12 | A05 |
Grey iron | G01 | ||||
Stuffing Box | Metal | AB27: 23%-30% chrome white iron | ≥56 | Used for higher wear condition with pH between 5 and 12 | A05 |
Grey iron | G01 | ||||
Frame/Cover plate, bearing house & base | Metal | Grey iron | G01 | ||
Ductile iron | D21 | ||||
Shaft | Metal | Carbon steel | E05 | ||
Shaft sleeve, lantern ring/resctrictor, neck ring, gland bolt | Stainless steel | 4Cr13 | C21 | ||
304 SS | C22 | ||||
316 SS | C23 | ||||
Joint rings & seals | Rubber | Butyl | S21 | ||
EPDM rubber | S01 | ||||
Nitrile | S10 | ||||
Hypalon | S31 | ||||
Neoprene | S44/S42 | ||||
Viton | S50 |
Tel: 86-136-6311-6988
Fax: 86-311-67962856