Standard Slurry Pump Parts and OEM Slurry Pump Parts of high chrome cast iron material

Centrifugal Mining slurry Pump Parts

Products:

Casting,

Shaft,

Throat bush,

Front liner,

Back liner,

Wear plate,

Case, cover,

Stuffing box,

Lantern restrictor,

Plate bolt,

Volute,

Shaft sleeve,

Cover plate liner,

Frame plate liner,

Neck ring,

Expeller ring,

Expeller,

Bearing assembly,

Volute liner,

Volute packing,

Bowl,

Bearing cartridge,

Cover plate liner,

Impeller,

Closed impeller,

Open impeller

Features:

Bearing assembly &nd; a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.

Liners &nd; easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomeric. Elastomeric seal rings back all liner joints.

Casing &nd; Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.

Impeller &nd; front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomeric impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.

Throat bush &nd; wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.

One-piece frame &nd; a very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.

Materials: