Payment & Shipping Terms:
|Material:||High Chrome Alloy, Cr26, Cr27||Structure:||Single-stage, Horizontal|
|Application:||Mining Foam Feeding, Foam Transfering, Sand Handling||Fuel:||Motor|
High Chrome Impeller,
Foam Concentrate Transfer Pump
Heavy duty froth pump for mineral foam feeding, foam transfering, sand handling
High efficiency & energy saving
Special for frothy pulp
High chrome wet part
WP Series of Froth Pump is a new type, high efficiency&energy saving pump.
These basic principle of the pump of operation is to de-aerated or partially de-aerated the froth before it enter the pumping. Its handing capacity of the pump is much higher than that of other types of slurry pump without shaft seal and sealing water. The froth pump is a perfect pump for handing frothy pulp indeed.
The basic principle of the pump of operation is to de-aerated or partially de-aerated the froth before it entersthe pumping. Its handing capacity of the pump is much higher than that of other types of slurry pump without shaft seal and sealing water. The froth pump is a perfect pump for handing frothy pulp indeed.
All wet-parts can be supplied in Nihard, high chrome alloy iron and pressermoulded natural or synthetic rubber.
The driver can be exchanged with that of type WY & WYJ pumps. The hopper-tank is fabricated with steel plate.Its inner wall of the tank can be covered with liner according to different medium pumped.
The discharge branch can be positioned at intervals of 45 degree by request and oriented to any 8 position to suit installations and applications. The advantages of the pump are of excellent performance,easy assembly &disassembly,high reliability and etc