Product Details:
Payment & Shipping Terms:
|
Material: | A05, A07, A33, A49,R08, R26, R33, | OEM: | Manufacture Accroding To Drawing |
---|---|---|---|
Application: | Interchangable To Minng Slurry Pump, Slurry Pump, Sand Dreding Pump Parts | Process: | Cast |
High Light: | River Sand Pumping Machine,Sand Pumping Machine |
1. Sand gravel and Slurry pump parts
Completely interchangeable with slurry pumps and gravel pumps
For unlisted slurry pump parts, OEM service offered---Drawings needed.
- Impeller
- Metal Liner
- Rubber Liner
- Bearing Assembly
- Base
- Pump Volute;
- Cover Plate & Frame Plate
- Others
2. Materials
High chrome alloy: A05, A07, A33, A49, etc.
Natural rubber: R08, R26, R33, , etc.
Other material as per requests, like stainless steel, duplex stainless steel, Nickle alloy, Alloy 20, etc.
Slurry Pump Part Material
Part Name | Material | Specification | HRC | Application | OEM Code |
Liners & Impeller | Metal | AB27: 23%-30% chrome white iron | ≥56 | Used for higher wear condition with pH between 5 and 12 | A05 |
AB15: 14%-18% chrome white iron | ≥59 | Used for higher wear condition | A07 | ||
AB29: 27%-29% chrome white iron | 43 | Used for lower pH condition especially for FGD. It also can be used for low-sour condition and desulfuration installation with pH no less than 4 | A49 | ||
AB33: 33%-37% chrome white iron | It can transport oxygenated slurry with pH not be less than 1 such as phospor-plaster, nitric acid, vitriol, phosphate etc. | A33 | |||
Rubber | R08 | ||||
R26 | |||||
R33 | |||||
Expeller & expeller ring | Metal | B27: 23%-30% chrome white iron | ≥56 | Used for higher wear condition with pH between 5 and 12 | A05 |
Grey iron | G01 | ||||
Stuffing Box | Metal | AB27: 23%-30% chrome white iron | ≥56 | Used for higher wear condition with pH between 5 and 12 | A05 |
Grey iron | G01 | ||||
Frame/Cover plate, bearing house & base | Metal | Grey iron | G01 | ||
Ductile iron | D21 | ||||
Shaft sleeve, lantern ring/resctrictor, neck ring, gland bolt | Stainless steel | 4Cr13 | C21 | ||
304 SS | C22 | ||||
316 SS | C23 | ||||
Joint rings & seals | Rubber | Butyl | S21 | ||
EPDM rubber | S01 | ||||
Nitrile | S10 | ||||
Hypalon | S31 | ||||
Neoprene | S44/S42 | ||||
Viton | S50 |
Type G series sand pump are designed for continuously handling the most difficult higher abrasive slurries which contain too big solids to be pumped by a common pump.They are suitable for delivering slurries in mining, explosive sludge in metal smelting, dredging in dredger and course of rivers, and other fields. Type GH sand suction pumps are of high-head type.
Tel: 86-136-6311-6988
Fax: 86-311-67962856