Payment & Shipping Terms:
|Material:||A05, A07, A33, A49||OEM:||Manufacture Accroding To Drawing|
|Application:||Interchangable To Submersible Slurry Pump||Process:||Cast|
Submersible Sludge Pump,
Submersible Mud Pump
OEM Centrifugal Industrial Slurry Pump Parts
Throat bush, Front liner,
Back liner, Wear plate,
Case, cover, Stuffing box,
Lantern restrictor, Plate bolt,
Volute, Shaft sleeve,
Cover plate liner, Frame plate liner,
Neck ring, Expeller ring,
Expeller, Bearing assembly,
Volute liner, Volute packing,
Bowl, Bearing cartridge,
Cover plate liner, Impeller,
Closed impeller, Open impeller
Bearing assembly – a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Liners – easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomeric. Elastomeric seal rings back all liner joints.
The cover plate is produced using elastomer or hard metal,
such as natural rubber, high - chromium alloy, etc.
It has various sizes and styles, and the installation is very easy. Additionally, OEM design is accepted. This product is also named as slurry pump liner, and it is also an overflow component. It can form a pump chamber with throat bush and frame plate liner insert. Meanwhile, it is white iron with high-chromium alloy whose content as much as 27%, and it shows good resistance to abrasion
Casing – Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomeric impellers are completely interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
Throat bush – wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
One-piece frame – a very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.
- OEM Service
We also provide OEM service according to customer's any special requirements .
- Processing Service
- Can manufacture parts according to your drawings.
- Materials as follows:
1. High Chrome concentration alloy 1, Rockwell hardness HRC ≥60, high abrasion application.
2. High Chrome concentration alloy 2, Rockwell hardness HRC ≥58, high abrasion application .
3. High Chrome concentration alloy 3, both anti-abrasion and corrosion-resistant, can be used in PH ≥4 and cl- 20000 ppm environment.
Submersible slurry pump introduction :
Submersible slurry pumps are a durable,electro-submersible slurry pumps,Versatile and rugged solution for the transfer of abrasive and high density slurries in mining,civil construction,industry and other heavy duty applications.
Features of submersible slurry pump:
1, Large cut water clearance: The pump casing features a large cut water clearance which allows the easy passage of large solids and reduces wear and erosion to improve service life and prevent loss of efficiency.
2, Integral agitator: The 27% chrome white iron agitator assists in the pumping of slurries by breaking up large particles and agitating high concentrations of solids.
3, F class motor insulation
4, Support frame and strainer
5, Double mechanical seal
6, Oil chamber leakage probe
7, Optional external cooling
Performance ranges of submersible slurry pump:
|Discharge Sizes:||80mm - 400mm|
|Flow rates:||23t o 2400 m3/h|
|Head:||up to 64m|
|Solids diameter:||up to 60mm(2.4 inches)|
|Material:||27% chrome white iron|
Submersible slurry pump Use Conditions:
1. The power source is 50Hz/380V,60hz,415v,220v,3 phases(If the voltage have special requirements, please inform in advance)
2.The temperature of the medium cannot exceed 60°C, and it does not contain inflammable or explosive gases.If the tempreture is higher,we can add pressured cooling system.
3.The maximum weight concentration of the ash is 30% and maximum weight concentration of the slag is 60%.
4. Maximum submerged depth under the water is 20 meters, the minimum submerged depth takes submerging of the motor as reference.
5. Working status in the medium is vertically and continuous